home |about us | OSHA compliance | environmental waste minimization programs | video | links
hazardous materials response kit | other products and services |customer testimonials | contact us |consortium

 

VACU-BOOM

Waste Water Capture
and
Spill Containment System

A good way to obey the strict laws against Environmental Pollution.
U.S. Pat. No. 5,349,722

What is Vacu-Boom?

  • An innovative and practical waste water capture system to prevent run-off from washing operations indoors and outdoors.
  • A highly effective spill containment system for many hazardous materials.

 The Vacu-Boom system is engineered to be used in a wide variety of industrial and commercial applications where chemicals and fluid waste must be contained and/or captured and removed from the site.

 The Vacu-Boom is a hollow, flexible tube five inches in diameter that is placed directly on a hard surface to form a downslope side dam or to completely encircle the wash or containment area. The boom has a C shaped cross section with the open side down. There are small liquid inlet openings on the water side of the boom at the bottom edge. During use, the boom is connected by a 25 ft. vacuum hose to the portable wet vacuum recovery unit.


 How does Vacu-Boom work?

 When the wet vac system is turned on, the Vacu-Boom tightly seals itself to the surface like a giant suction cup, to form an impervious liquid barrier. Simultaneously, the waste water or other liquid is extracted into the boom and travels with the airflow through the boom and vacuum hose into the sump of the vacuum unit. The vacuum unit is equipped with an automatic pump out system which discharges water through a discharge hose into a holding tank, filter unit or sanitary sewer.

When containing highly toxic materials or flammable liquids that should not be drawn into the vacuum unit, the vacuum is used only to create a tight seal between the boom and the surface. The liquid is not extracted through the boom and vacuum.


 Where can Vacu-Boom be used?

  • Outdoor vehicle or equipment washing
  • In-plant equipment washing
  • Emergency storm water containment
  • Boats and ships - to prevent deck run-off
  • Marinas - to prevent contamination from run-off
  • Parking lot or sidewalk washing - to capture dirty water run-off
  • Emergency hazardous liquid spill containment
  • Airports - to capture run-off from aircraft washing


 What are some of the features of Vacu-Boom?

  • Can be used on any hard surface such as concrete, asphalt, wood and steel.
  • Fast set up and take down - less than 5 minutes for one person.
  • Simultaneously captures and extracts liquids for waste water and many liquid spills.
  • Captures and contains concentrated flammables or hazardous liquids without extraction.
  • Materials used in Vacu-Boom do not absorb liquids and contaminants. Can be rinsed off easily after use.
  • Easy to store and transport. Vacu-Boom breaks down into 5 ft. long sections.
  • High degree of tolerance for acids, caustics and petro chemicals.


 Can Vacu-Boom be used in my environment?

 Many questions that you may have about using the Vacu-Boom equipment have already been answered for our customers. Reading theFAQs (Frequently Asked Questions) about Vacu-Boom will help you understand how you can use Vacu-Boom productively in your environment.